机顶盒遥控器学习方法英文双语对照

学习机顶盒遥控器的方法通常涉及以下步骤：

1. **准备工作**：确保你有两个遥控器，一个是你想要学习的机顶盒遥控器，另一个是已经学会了基本功能的通用遥控器或原厂遥控器。

2. **进入学习模式**：通常，你需要按下通用遥控器或原厂遥控器上的特定按钮，使其进入学习模式。这个按钮可能被标记为“学习”、“学习模式”或者类似的标识。一旦进入学习模式，遥控器的指示灯可能会发出信号，表明它已准备好学习。

3. **学习功能**：接下来，按下机顶盒遥控器上的一个特定按钮，比如“电源”或“音量+”。然后，立即按下通用遥控器或原厂遥控器上对应的按钮，这样遥控器就会学习并存储这个功能。

4. **测试功能**：完成学习后，使用通用遥控器或原厂遥控器上的相应按钮来测试学习的功能是否有效。如果一切正常，机顶盒应该对这个功能做出相应的响应。

5. **重复学习**：对于你想要学习的其他功能，重复以上步骤，直到你满意为止。

6. **保存设置**：一旦你学会了所有想要的功能，确保按下通用遥控器或原厂遥控器上的保存按钮，以保存你的设置。这可能是一个标记为“完成”、“保存”或类似的按钮。

这种方法可能因遥控器的型号和品牌而有所不同，所以最好查阅你的遥控器的说明书以获取准确的操作指南。

The method that studies remote controller of machine top box involves the following step normally:

1.** prepares working ** : Ensure you have two remote controllers, one is the chance that you want to learn remote controller carrying a box on the head, another is the current remote controller that had learned basic function or former plant remote controller.

2.** enters study mode ** : Normally, you need to press the specific pushbutton on current remote controller or former plant remote controller, make its enter study mode. This pushbutton may is by mark " study " , " study mode " similar perhaps label. Once enter study mode, the indicator light of the remote controller may issue signal, show it already prepared study.

3.** learns functional ** : Next, press a on remote controllers of next machine top box specific button, for instance " power source " or " volume + " . Next, press instantly the corresponding pushbutton on current remote controller or former plant remote controller, such remote controllers can learn and store this function.

4.** checks functional ** : After the study that finish, the function that uses the corresponding pushbutton on current remote controller or former plant remote controller to check study is valid. If everything is normal, machine top box should make corresponding response to this function.

5.** repeats study ** : Want the other function of study to you, repeat above measure, till you till satisfaction.

6.** saves setting ** : Once you learned all wanted functions, ensure press on current remote controller or former plant remote controller save pushbutton, in order to save your setting. This may be a mark is " finish " , " save " or similar pushbutton.

This kind of method is possible because of the model of the remote controller and brand differ somewhat, had better consult so the manual of your remote controller operates a guideline well and truly with getting.