苹果iphone充电器里面的IC是什么IC？英文双语对照

一、苹果iphone充电器里面的IC是什么IC？

　　T23-6，这是苹果充电器中使用的IC，也是唯一的一种IC。

　　配置：2.1A/1AUSB充电器 　　型号：APPLE12WUSBPOWERADAPTER 　　输入：100-240V~50-60/HZ 　　输出：5V/1A 　　iPhone5、iPhone5s以及iPhone6的充电器输出是5V，1A的规格,输入电压都是110V～240V，三者的充电规格是一样的。

二、松下数码相机充电器？

相机充电器是有指示灯的……有的是指示灯闪烁表示正在充电，指示灯常亮表示电量充满；还有的充电器是红灯表示充电，绿灯表示充满……

三、充电器加IC跟不加IC有什么区别？

    充电器加IC跟不加IC的区别是:

    充电器加IC表示其内置有电池过充保护装置，可以防止电池的过充；而不加IC则没有此项功能。

    IC表示是集成块，它是由几十到几万个晶体管组装在起，都是功能各异的IC晶片，充电器加IC组装出来使用时的电压比较准确。

四、充电器坏了需要什么ic？

充电器一般需要芯片为：U6513、U65113、U6215、U6315。这些都是充电器市场常用的5V1A和5V2A的充电器IC，

手机充电器中的核心元器件为充电器芯片，也称为充电器IC，在充电过程中起到了至关重要的作用，充电器芯片主要负责的工作是把交流电转换为手机匹配的直流电，以此才能达到给手机输送能量的目的，

五、手机充电器同步IC是什么？

是采用半导体制作工艺,在一块较小的单晶硅片上制作上许多晶体管及电阻器、电容器等元器件,并按照多层布线或遂道布线的方法将元器件组合成完整的电子电路。

它在电路中用字母“IC”或用“N”表示。手机充电器里面的IC是充电时控制和检测电流和电压的,还有的是检测充电时的温度,充电器以最佳的状态为电池充电。

六、ic充电器是什么意思？

IC，即集成电路是采用半导体制作工艺，在一块较小的单晶硅片上制作上许多晶体管及 电阻 器、 电容 器等元器件，并按照多层布线或遂道布线的方法将元器件组合成完整的电子电路。它在电路中用字母“IC”(也有用文字符号“N”等)表示。

手机充电器里面的IC是充电时控制和检测电流和电压的，电器以最佳的状态为电池充电。

七、数码相机的充电器通用吗？

数码相机的充电器并不是所有的都通用，因为不同品牌的相机所需要的电压和电流可能会有所不同，因此不同品牌的相机充电器可能是不兼容的。此外，即使是相同品牌的相机，不同型号也可能需要不同的充电器。因此，如果你需要购买一个充电器，最好是购买与你的相机品牌和型号相对应的专用充电器，这样可以确保充电效果好并且避免不必要的安全风险。

八、佳能数码相机用什么充电器？

买相机的时候都带原装充电器的，再说你也不说是什么型号，叫大家怎么帮你？如果是3.7V锂电池，可以用手机万能充。

九、如何用佳能数码相机充电器？

使用佳能数码相机充电器充电相机的步骤如下：

1. 准备充电器和电源适配器：将佳能数码相机充电器和电源适配器取出并准备好。

2. 插入插头：将电源适配器的插头插入您所在地的电源插座。确保插座电源开关处于关闭状态。

3. 连接电源适配器：将电源适配器的线缆连接到充电器上，确保连接牢固。

4. 连接USB线：插入充电器上的USB端口，将其连接到数       码相机的USB充电口。

5. 连接相机：根据您的相机型号，将相机的USB充电口与USB线连接。确保连接稳固。

6. 电源开关：在佳能数码相机的电源开关处于关闭状态下，将插头插入相机电源插口。

7. 充电指示灯：一旦插入电源适配器并连接好相机，充电指示灯应该会亮起，表示相机正在充电。

8. 等待充电完成：根据相机的充电状态和电池容量，等待一段时间，直到充电指示灯熄灭或显示已充满。这表示       相机已完全充电。

9. 断电：拔掉电源     适配器插头，断开与相机的连接。拆除充电器线缆，将其妥善收纳。

请注意，在充电过程中，建议遵循佳能官方的相关指示和建议，以确保安全和充电效果。对于具体的相机型号，您还可以参考佳能相机的用户手册和官方说明书，以获取更详细的充电指南。

十、IC在充电器中起什么作用？

“带IC保护”的意思是此充电器内置有电池过充保护电路，可以防止电池的过充。 IC是集成电路的缩写,在充电器中IC起到充电检测和控制充电器工作的作用,当IC检测到被充电电池已充满时,IC会自动切断充电电源以保护充电电池不被过充。

---

英文翻译对照，仅供参考

---

One, what IC is the IC inside malic Iphone charger?

T23-6, this is the IC that uses in malic charger, also be a kind of exclusive IC.

Configuration: Model of 2.1A/1AUSB charger 　 : APPLE12WUSBPOWERADAPTER 　 inputs: 100-240V~50-60/HZ 　 outputs: The charger output of IPhone5 of 　 of 5V/1A 　 , IPhone5s and IPhone6 is 5V, the norms of 1A, inputting voltage is 110V ～ 240V, 3 person charge norms is same.

2, charger of camera of the number below the pine?

Camera charger is have indicator light... have a plenty of indicator light to twinkle express to charging, indicator light Chang Liang expresses n to be full of; Returning some charger is red light expresses to charge, green light expresses to be full of...

3, does charger add IC to follow not to add IC what to distinction there is?

   The distinction that charger adds IC to follow not to add IC is:

   Charger adds IC to state the buy inside its has batteries to fill protector too, can prevent cell fill too; And do not add IC to do not have this function.

   It is compositive that IC expresses piece, it is by a few assemble to tens of thousands of transistor rising, it is a function the IC chip of each different, charger adds IC to assemble the voltage when coming out to use more accurate.

4, did charger become bad what Ic to need?

Charger needs chip to be commonly: U6513, U65113, U6215, U6315. These are the charger IC of the 5V1A with charger commonly used market and 5V2A,

The core in mobile phone charger yuan parts of an apparatus is charger chip, also call charger IC, charging crucial effect had in the process, the job that charger chip basically is in charge of is the dc that matchs alternating current changeover for the mobile phone, achieve the goal that carries energy to the mobile phone with this ability,

5, what is IC of synchronism of mobile phone charger?

It is to use semiconductor to make technology, a lot of transistor and resistor, capacitor is made wait for yuan of parts of an apparatus on a lesser single crystal silicon chip, and according to multilayer wiring or the method that satisfy wiring will yuan the electronic circuit with integrated synthesis of group of parts of an apparatus.

It uses a letter in circuit " IC " or with " N " express. The IC inside mobile phone charger is when charging, be controlled and detect of electric current and voltage, still have a plenty of detect the temperature when charging, charger charges for batteries with first-rate condition.

6, what meaning is Ic charger?

IC, namely integrated circuit is to use semiconductor to make technology, a lot of transistor and resistor, capacitor is made wait for yuan of parts of an apparatus on a lesser single crystal silicon chip, and according to multilayer wiring or the method that satisfy wiring will yuan the electronic circuit with integrated synthesis of group of parts of an apparatus. It uses a letter in circuit " IC " (symbol of useful also character " N " etc) express.

The IC inside mobile phone charger is when charging, be controlled and detect of electric current and voltage, electric equipment charges for batteries with first-rate condition.

7, is the charger of digital camera general?

The charger of digital camera is not all general, because differ,the voltage that the camera place of the brand needs and electric current may differ somewhat, because this is different,the camera charger of the brand may be incompatible. In addition, even if the camera of same brand, different type needs different charger possibly also. Accordingly, if you need to buy a charger, had better be the special charger that buys the camera brand with you and model to answer relatively, can ensure so charge the effect is good and avoid needless safe risk.

8, beautiful can what charger does digital camera use?

Former outfit charger takes when buying camera, saying you also do not say again is what model, how to call everybody to help you? If be 3.7V lithium battery, can use a mobile phone all-purpose fill.

9, how to use beautiful can digital camera charger?

Use beautiful can digital camera charger charges the move of camera is as follows:

1.Prepare charger and power source adapter: Digital camera charger and power source adapter are taken out and can prepare beautiful.

2.Insert plug: Insert the outlet of power source adapter the power source electrical outlet of your seat. Ensure mains switch is in socket close position.

3.Adapter of join power source: the wire cable of power source adapter join arrives on charger, ensure link is firm.

4.Join USB line: Insert the USB port on charger, receive its number repeatedly   The USB that piles up camera charges mouth.

5.Join camera: According to your camera model, charge the USB of camera mouth and USB line join. Ensure link is firm.

6.Mains switch: In beautiful can the mains switch of digital camera is in shut condition to fall, insert plug socket of camera power source.

7.Charge indicator light: Once insert power source adapter to join good watch for a chance, charge indicator light should be met shine, state camera is charging.

8.Wait to charge finish: According to camera charge condition and batteries capacity, await period of time, until charge to indicator light goes out or show already was full of. This expresses   Camera charges completely already.

9.Cut off the power: Unplug power source  Adapter outlet, disconnect the join with camera. Demolish charger wire cable, its appropriate is received.

Ask an attention, charging in the process, the proposal abides by beautiful can official relevant indication and proposal, charge in order to ensure safety is mixed the effect. To specific camera type, you return OK and referenced beautiful can the user manual of camera and official manual, in order to get more detailed charge guideline.

10, what effect does IC have in charger?

"The protection that take IC " the buy inside this charger has means batteries fills protective circuit too, can prevent cell fill too. IC is the abbreviate of integrated circuit, in charger IC rises to charge to detect and control the function that charger works, detect when IC be charged when batteries already was full of, IC can be cut off automatically charge power source charges with protection batteries is not passed to fill.